BC RACING BR SERIES GOLD COILOVERS – TOYOTA COROLLA AE100 / AE101 / AE110 / AE111 – NON SUPER STRUT
Set up your Toyota Corolla with BC Racing BR Series Gold Coilovers. Designed for street driving and occasional track use, this complete four-corner kit combines adjustable ride height with tunable damping.
The 30-position damping adjustment changes compression and rebound together. Body-length height adjustment allows ride height to be set separately from spring preload.
Key Features
- Complete set of four coilovers.
- Monotube dampers.
- 30-position combined compression and rebound adjustment.
- Body-length ride height adjustment.
- Front pillowball mounts with camber adjustment.
- Solid rear top mounts.
- SAE9254 steel springs.
- Rebuildable construction.
Specifications
| Specification | Details |
|---|---|
| Brand | BC Racing |
| Series | BR Series / BC Gold |
| Front Spring Rate* | 5kg/mm |
| Rear Spring Rate* | 2.5kg/mm |
| Front Top Mounts | Camber-adjustable pillowball |
| Rear Top Mounts | Solid |
| Damping Adjustment | 30 positions; compression and rebound adjusted together |
| Height Adjustment | Via damper body length |
| Quantity | Four coilovers: two front and two rear |
| Warranty | 12 months, subject to applicable warranty terms |
*Advertised spring rates are 5kg/mm front and 2.5kg/mm rear. Supplied rates may vary; confirm before ordering if a specific spring combination is required.
Vehicle Compatibility
| Make | Model | Chassis | Suspension Requirements |
|---|---|---|---|
| Toyota | Corolla | AE100 | Front-wheel drive; conventional strut suspension |
| Toyota | Corolla | AE101 | Front-wheel drive; excludes Super Strut suspension |
| Toyota | Corolla | AE110 | Front-wheel drive; conventional strut suspension |
| Toyota | Corolla | AE111 | Front-wheel drive; excludes Super Strut suspension |
Adjustment & Setup
Use the damping adjusters to fine-tune suspension response to suit your driving conditions. Compression and rebound share one adjuster, so they cannot be set independently.
Ride height should be adjusted using the damper body in accordance with BC Racing's instructions. Maintain the specified spring preload and minimum lower-mount thread engagement. Arrange a wheel alignment after installation and whenever ride height or camber is changed.
Important Notes
- Product images are illustrative and may show a different application.
- Pillowball mounts can transmit more road noise and vibration than factory rubber mounts.
- Confirm the supplied spring rates and top-mount configuration if these are critical to your setup.
Part Number: C-03-BR
