HKS FLASH EDITOR TUNER SUBARU WRX STI VAB EJ20 2014-2020 (JDM IMPORT)

【FLASH EDITOR】

HKS' ECU ReFlash tool is available for tuning beginners and professionals.

Flash Editor is a setting tool for ECU reflash via OBD II connection.

SUBARU WRX STI VAB EJ20 2014-2020 (JDM IMPORT)

Summary

• ECU reflashing via the on board diagnostics port (OBD II) is made possible.
• Stock data can be read and written.
• Can save stock ECU data and 3 other custom data files.
• HKS produced data (Phase 1, Phase 2) is preinstalled.
• Data can be edited by F-CON dealer with Power Writer.
• 1 Flash Editor is used per vehicle tuned.

* Data are prepared based on the JDM vehicle.

Data for Standard Unit and Power Writer Shops

* Some vehicles can only be installed HKS S/C DATA1

Main Functions

• ECU Read
  Read ECU data and store via OBD II connection.
• Create and Save Custom Data
  Create and save custom data based on saved stock ECU data.
• Write to ECU
  Write to ECU. write stock or custom data to ECU.
• Vehicle Information Display
  Display vehicle information via OBD II connection.
• USB Connection
  USB connection for connection with Power Writer. (Only available for PowerWriter shops)
• Data Protection
  Each Flash Editor is restricted to 1 vehicle and data are protected.

Main Features

Connection to a PC is not required for ECU Reflash

• Vehicle data is preset; FLASH EDITOR can practice ECU reflash by itself.
• Custom data can be reverted to the stock data.
• 2 different preset custom data are available.
• Data are protected to prevent data from being leaked by other tools.

High performance scalability /PowerWriter for FLASH EDITOR

• Vehicle specific custom data can be created.
• HKS' authorized PowerWriter shops have the special software.
• A special software is available for HKS PowerWriter shops.
• PowerWriter shops can provide precise settings to meet user's needs.

Compatible with F-CON iS / F-CON V Pro

• Select F-CON iS or V Pro suitable for the level of tuning.
• Flash Editor prevents the CEL from coming on while using the F-CON V Pro.
• Real-time map data edit is available by use with the F-CON.

Note

【Before Use】

• Only ECU IDs saved on the FLASH EDITOR unit is writable. (To write other ECU IDs, FLASH EDITOR software or Power Writer software must be upgraded.)
   * Data are prepared based on the JDM vehicle.

[Applicable ECU ID Codes] (2012.9.21)

• VAC cannot be used with Flash Editor.
• Flash Editor functions based on the stock ECU data; data customized by other ReFlash tool are not applicable.
• Make sure the battery voltage is high enough.

【When using】

• During data transmission, do not disconnect the connector, turn off the ignition power, operate the A/C, hazard light, etc.
• Battery voltage shortage may cause communication error. When the error is noticed, recharge the battery.